System/doom.d/config.org

#+title: Nathan's Doom Emacs Configuration
#+author: Nathan McCarty
#+PROPERTY: header-args:emacs-lisp :tangle yes

My doom emacs configuration

* Basic Doom stuff

The provided default ~config.el~

#+begin_src emacs-lisp
;;; $DOOMDIR/config.el -*- lexical-binding: t; -*-

;; Place your private configuration here! Remember, you do not need to run 'doom
;; sync' after modifying this file!


;; Some functionality uses this to identify you, e.g. GPG configuration, email
;; clients, file templates and snippets. It is optional.
(setq user-full-name "Nathan McCarty"
      user-mail-address "nathan@mccarty.io")

;; Doom exposes five (optional) variables for controlling fonts in Doom:
;;
;; - `doom-font' -- the primary font to use
;; - `doom-variable-pitch-font' -- a non-monospace font (where applicable)
;; - `doom-big-font' -- used for `doom-big-font-mode'; use this for
;;   presentations or streaming.
;; - `doom-unicode-font' -- for unicode glyphs
;; - `doom-serif-font' -- for the `fixed-pitch-serif' face
;;
;; See 'C-h v doom-font' for documentation and more examples of what they
;; accept. For example:
;;
(setq doom-font (font-spec :family "FiraCode Nerd Font" :size 11 :weight 'semi-light)
      doom-unicode-font (font-spec :family "FiraCode Nerd Font" :size 11 :weight 'semi-light)
      doom-variable-pitch-font (font-spec :family "Fira Sans" :size 15))
;;
;; If you or Emacs can't find your font, use 'M-x describe-font' to look them
;; up, `M-x eval-region' to execute elisp code, and 'M-x doom/reload-font' to
;; refresh your font settings. If Emacs still can't find your font, it likely
;; wasn't installed correctly. Font issues are rarely Doom issues!

;; There are two ways to load a theme. Both assume the theme is installed and
;; available. You can either set `doom-theme' or manually load a theme with the
;; `load-theme' function. This is the default:
;; (setq doom-theme 'doom-solarized-dark)
(use-package! solarized-theme
  :demand t
  :config
  (setq solarized-distinct-fringe-background t
        solarized-distinct-doc-face t
        solarized-scale-markdown-headlines t
        solarized-scale-org-headlines t)
  (load-theme 'solarized-selenized-dark t))

;; This determines the style of line numbers in effect. If set to `nil', line
;; numbers are disabled. For relative line numbers, set this to `relative'.
(setq display-line-numbers-type t)

;; If you use `org' and don't want your org files in the default location below,
;; change `org-directory'. It must be set before org loads!
(setq org-directory "~/Org/")


;; Whenever you reconfigure a package, make sure to wrap your config in an
;; `after!' block, otherwise Doom's defaults may override your settings. E.g.
;;
;;   (after! PACKAGE
;;     (setq x y))
;;
;; The exceptions to this rule:
;;
;;   - Setting file/directory variables (like `org-directory')
;;   - Setting variables which explicitly tell you to set them before their
;;     package is loaded (see 'C-h v VARIABLE' to look up their documentation).
;;   - Setting doom variables (which start with 'doom-' or '+').
;;
;; Here are some additional functions/macros that will help you configure Doom.
;;
;; - `load!' for loading external *.el files relative to this one
;; - `use-package!' for configuring packages
;; - `after!' for running code after a package has loaded
;; - `add-load-path!' for adding directories to the `load-path', relative to
;;   this file. Emacs searches the `load-path' when you load packages with
;;   `require' or `use-package'.
;; - `map!' for binding new keys
;;
;; To get information about any of these functions/macros, move the cursor over
;; the highlighted symbol at press 'K' (non-evil users must press 'C-c c k').
;; This will open documentation for it, including demos of how they are used.
;; Alternatively, use `C-h o' to look up a symbol (functions, variables, faces,
;; etc).
;;
;; You can also try 'gd' (or 'C-c c d') to jump to their definition and see how
;; they are implemented.
#+end_src
* Appearance and UI
** Centaur tabs
#+begin_src emacs-lisp
(use-package! centaur-tabs
  :config
  (setq centaur-tabs-set-icons t
        centaur-tabs-set-bar 'underflow
        centaur-tabs-style "wave"
        centaur-tabs-enable-key-bindings t)
  (centaur-tabs-headline-match)
  (centaur-tabs-group-by-projectile-project))
#+end_src
** Mixed Pitch Mode
Use mixed pitch mode in prose writing modes, to make the writing experience a bit more pleasant.
This tweak applies to:
- ~org-mode~
- ~markdown-mode~
#+begin_src emacs-lisp
(use-package! mixed-pitch
  :hook
  (org-mode . mixed-pitch-mode)
  (markdown-mode . mixed-pitch-mode)
  :config
  (setq mixed-pitch-set-height t))
#+end_src

Setting ~mixed-pitch-set-height~ is required to get ~mixed-pitch-mode~ to render fonts with the correct size in doom emacs, apparently.
** Modeline configuration
Configure the modeline to:
 + truncate with project (so that ~~/Projects/Asuran/replicator/src/lib.rs~ becomes ~replicator/s/lib.rs~)
 + Show the mu4e alert
#+begin_src emacs-lisp
(setq doom-modeline-buffer-file-name-style 'truncate-with-project
      doom-modeline-mu4e t)
#+end_src

Display the current time in the modeline
#+begin_src emacs-lisp
(display-time-mode 1)
#+end_src
** Treemacs
Configure treemacs, doing the following:

#+begin_src emacs-lisp
(after! treemacs
  (setq treemacs-width 25))
#+end_src
* Basic Editing
** Fill Column
Set the default fill column to 100
#+begin_src emacs-lisp
(setq-default fill-column 100)
#+end_src
** Navigation
*** Avy
More modern ace-jump-mode

Set up our key bindings
#+begin_src emacs-lisp
(after! avy
  (define-key!
    "C-:" 'avy-goto-char
    "C-'" 'avy-goto-char-2
    "M-g f" 'avy-goto-line
    "M-g w" 'avy-goto-word-1
    "M-g e" 'avy-goto-word-0)
  (cheatsheet-add-group 'Avy
                        '(:key "C-:" :description "Goto Char")
                        '(:key "C-'" :description "Goto Char (2)")
                        '(:key "M-g f" :description "Goto line")
                        '(:key "M-g w" :description "Goto word")
                        '(:key "M-g e" :description "Goto word (0)")))

#+end_src
*** Swiper
Better isearch

Override old isearch
#+begin_src emacs-lisp
(after! swiper
  (define-key! "C-s" 'swiper))
#+end_src
** Crux
Smarter replacements for emacs built ins, with the following in use:
 - ~crux-smart-kill-line~ - Smart ~C-k~ replacement
 - ~crux-top-join-line~ - ~C-c ^~ Join two lines

#+begin_src emacs-lisp
(use-package! crux
  :bind (("C-k"   . crux-smart-kill-line)
         ("C-c ^" . crux-top-join-line)))
#+end_src
** string-inflection
Automatically cycle case of names
#+begin_src emacs-lisp
(global-unset-key (kbd "C-q"))
(use-package! string-inflection
  :bind (("C-q" . string-inflection-all-cycle)))
(cheatsheet-add-group 'string-inflection
                      '(:key "C-q" :description "Rotate case"))
#+end_src
** Smart Hungry Delete
Gobble up whitespace in a smarter way
#+begin_src emacs-lisp
(use-package! smart-hungry-delete
  :bind (("M-<backspace>" . smart-hungry-delete-backward-char)))
#+end_src
** Search
*** Deadgrep
Ripgrep, but from within emacs
#+begin_src emacs-lisp
(use-package! deadgrep
  :bind ("C-c s r" . deadgrep))
#+end_src

* Org Mode
Improvements to the best mode in emacs

Setup some basic cosmetic improvements
 - Disable showing of emphasis markers
 - Show entities as utf-8 ~test~

  #+begin_src emacs-lisp
(setq org-hide-emphasis-markers t
      org-pretty-entities t)
  #+end_src

Setup org-superstar-mode, to make lists and bullets pretty

  #+begin_src emacs-lisp
(use-package! org-superstar
  :hook (org-mode . org-superstar-mode)
  :config
  (setq org-superstart-special-todo-items t))
  #+end_src

  Automatically add all files in the org dir to the agenda. This performs some filtering of the files returned from ~directory-files~ to exclude some things that would confuse org-agenda.
  We also setup an idle timer, with a short duration, only 30 seconds, to update the ~org-agenda-files~ list, as well as a longer regular timer with a duration of 300 seconds (5 minutes) to keep the agenda up to date even when we are actively using emacs.
  #+begin_src emacs-lisp
(defvar nm/org-agenda-files-timer nil
  "Timer for automatically updating the org-agenda files")
(defvar nm/time-at-agenda-update 0
  "Time at last agenda update")

(defun nm/update-org-agenda-files ()
  "Helper function for updating the org-agenda files."
  ;; Calcuate time since last update
  (let* ((time-seconds  (float-time (current-time)))
         (seconds-since (- time-seconds nm/time-at-agenda-update))
         (idle-time     (current-idle-time))
         (idle-seconds  (if idle-time (float-time idle-time) 0)))
    ;; If it has been more than 10 minutes since our last agenda file update, then go ahead and update
    ;; Additionally update if the idle timer is greater than 30 seconds
    (when (or
           (> seconds-since 600)
           (> idle-seconds 30))
      ;; Update our time variable
      (setq nm/time-at-agenda-update seconds-since)
      ;; Update our agenda files
      (setq org-agenda-files
        (seq-filter (lambda (item)
                      (and
                       ;; Only accept things that are a directory, or an org file
                       (or (file-directory-p item)
                          (string-match-p ".*org$" item))
                       ;; Exclude the syncthing folder
                       (not (string-match-p ".*stfolder$" item))
                       ;; Exclude the elfeed data folder
                       (not (string-match-p (concat "^" (regexp-quote org-directory) "elfeed/.*") item))))
                    (directory-files-recursively org-directory directory-files-no-dot-files-regexp)))))
  ;; Update the timer, first canceling the old one
  (when nm/org-agenda-files-timer
    (cancel-timer nm/org-agenda-files-timer)
  (setq nm/org-agenda-files-timer (run-with-timer 60 nil 'nm/update-org-agenda-files))))

(after! org
  ;; Set the agenda files on first start
  ;; This also configures the timer for us
  (nm/update-org-agenda-files))
  #+end_src

Set up two different timers for updating the org-agenda buffer.
+ Idle timer
  The idle timer simply updates the views unconditionally, and is set with a slightly higher timeout than our idle time that updates the org agenda files. This idle time can safely modify the state of the buffer without any other checks, as if the user is idle, they aren't doing anything in the buffer
  + Timer timer
    Setup a timer that attempts to update the org-agenda buffer every 5 minutes. This timer is a little bit unsafe, so it _could_ end up annoying the user by updating the state while they are in the middle of doing something, so it cancels out and does nothing  if the user is currently focused on the agenda buffer.
  #+begin_src emacs-lisp
(defvar nm/org-agenda-update-timer nil
  "Timer for automatically updating the org-agenda views")

(defun nm/org-agenda-refresh-conditional ()
  "Helper function to only refresh the org-agenda views if it
either isn't focused or we have been idle long enough. This
avoids updating the buffer, and thus annoying the user, while
they are in the middle of doing something.

This function will run on a 60 second loop, only actually doing
work if it thinks it needs to."
  ;; Make sure the org-agenda-buffer exists, bail out if it doesnt
  (when (boundp 'org-agenda-buffer-name)
    ;; Attempt to get the org agenda buffer
    (when-let ((buffer (get-buffer org-agenda-buffer-name)))
      ;; Calcuate idle time
      (let* ((idle-time (current-idle-time))
             (idle-seconds (if idle-time (float-time idle-time) 0)))
        ;; Update the org-agenda views if any of the following apply:
        ;; - The agenda buffer is not in focus
        ;; - The idle time is greater than one minute
        (when (or
               (not (eq (window-buffer (selected-window)) buffer))
               (> idle-seconds 60))
          ;; Since we are not in the org-agenda-buffer it is safe to rebuild the views
          (with-current-buffer buffer
            (org-agenda-redo-all))))))
    ;; Update the timer, first canceling the old one
    (when nm/org-agenda-update-timer
      (cancel-timer nm/org-agenda-update-timer))
    (setq nm/org-agenda-update-timer (run-with-timer 60 nil 'nm/org-agenda-refresh-conditional)))

(after! org
  ;; This method sets up the timer on its own
  (nm/org-agenda-refresh-conditional))
  #+end_src

  Log state changes into a drawer
  #+begin_src emacs-lisp
(after! org
  (setq org-log-into-drawer t
        org-log-done 'time))
  #+end_src
** org-roam
A second brain in emacs


Here we:
 - Set the roam directory to be a sub-directory of the org directory, which I have in syncthing
 - Use a more informative display template, as we use ivy
 - Turn on db autosync
 - Setup dalies to add the time of the capture to the note
#+begin_src emacs-lisp
(use-package! org-roam
  :custom
  (org-roam-directory (concat org-directory "Roam/"))
  (org-roam-complete-everywhere t)
  :bind (("C-c r l" . org-roam-buffer-toggle)
         ("C-c r f" . org-roam-node-find)
         ("C-c r g" . org-roam-graph)
         ("C-c r i" . org-roam-node-insert)
         ("C-c r c" . org-roam-capture)
         ("C-c r T" . org-roam-dailies-capture-today)
         ("C-c r t" . org-roam-dailies-goto-today)
         :map org-mode-map
         ("C-M-i" . completion-at-point))
  :config
  (setq org-roam-node-display-template (concat "${title:*} " (propertize "${tags:10}" 'face 'org-tag)))
  (org-roam-db-autosync-mode)
  (setq org-roam-dailies-capture-templates
      '(("d" "default" entry "* %<%I:%M %p>: %?"
         :if-new (file+head "%<%Y-%m-%d>.org" "#+title: %<%Y-%m-%d>\n")))))
#+end_src
** org-protocol-capture-html
[[https://github.com/alphapapa/org-protocol-capture-html][Capture webpages]] really nice like
#+begin_src emacs-lisp
(use-package! org-protocol-capture-html)
#+end_src
** Capture Templates
The default template for org-protocol-capture-html
#+begin_src emacs-lisp
(after! org
  (push
   '("w" "Web site" entry
     (file "")
     "* %a :website:\n\n%U %?\n\n%:initial")
   org-capture-templates))
#+end_src
* General Modes
** Magit
Further configuration for magit
*** magit-todos
Count the number of todos in the project in the ~magit-status~ buffer
#+begin_src emacs-lisp
(use-package! magit-todos
  :hook (magit-mode . magit-todos-mode))
#+end_src
*** magit-delta
Use delta for git diff display
#+begin_src emacs-lisp
(use-package! magit-delta
  :hook (magit-mode . magit-delta-mode))
#+end_src
*** magit-wip-mode
Stash autosaves inside of git
#+begin_src emacs-lisp
(magit-wip-mode)
#+end_src
** System integration
Various tools for interacting with the system from within emacs
*** Terminal
Doom already provides pretty nice vterm support, but lets take us a step further, using ~multi-vterm~ to provide ergonomic support for multiple terminals.

Vterm really doesn't like being installed through emacs on nix, so proper support for it in my setup requires installing it through nix like so:
#+begin_src nix :tangle no
let emacsPackage = (emacsPackagesFor emacs).emacsWithPackages (epgks: with epkgs; [
      vterm
    ]);
in
{
  environment.systemPackages = [
    emacsPackage
  ];
}
#+end_src
**** [[https://github.com/suonlight/multi-vterm][multi-vterm]]
Add ergonomic support for multiple vterm terminals
#+begin_src emacs-lisp
(use-package! multi-vterm
  :bind (("C-c o M" . multi-vterm)
         ("C-c o m" . multi-vterm-project)))
#+end_src
* Programming
** General Editing
*** Sepraedit
Edit indirect for comments

Set the default mode to github flavored markdown, turn on smart use of fill column, and bind to the normal edit-indirect keybinding.
#+begin_src emacs-lisp
(use-package! separedit
  :bind
  (:map prog-mode-map
   ("C-c '" . separedit))
  :config
  (setq separedit-default-mode 'gfm-mode
        separedit-continue-fill-column t))
#+end_src
*** Rainbow delimiters
Makes pairs of delimiters into pretty colors. Hook this into prog-mode
#+begin_src emacs-lisp
(use-package! rainbow-delimiters
  :hook (prog-mode . rainbow-delimiters-mode))
#+end_src
** LSP Mode
Custom configuration for lsp-mode
*** LSP UI
Turn on the UI features we want
**** Sideline
Show as much as possible in the sideline
#+begin_src emacs-lisp
(after! lsp-ui
  (setq lsp-ui-sideline-show-diagnostics t
      lsp-ui-sideline-show-hover t
      lsp-ui-sideline-show-code-actions t))
#+end_src
**** Peeking
Turn on peeking, and show us the directory as well
#+begin_src emacs-lisp
(after! lsp-ui
  (setq lsp-ui-peek-enable t
      lsp-ui-peek-show-directory t))
#+end_src
**** Documentation
Show the documentation in a popup frame in the top right corner
#+begin_src emacs-lisp
(after! lsp-ui
  (setq lsp-ui-doc-enable t
      lsp-ui-doc-position 'top
      lsp-ui-doc-show-with-cursor t))
#+end_src
** Rust
Configuration specific for rust
*** LSP Tweaks
Most of these are defaults, but I like having them explicit for my sanity

#+begin_src emacs-lisp
(after! lsp-mode
  (setq lsp-auto-configure t
        lsp-lens-enable t
        lsp-rust-analyzer-cargo-watch-command "clippy"
        lsp-rust-analyzer-cargo-watch-args ["--all-features"]
        lsp-rust-analyzer-experimental-proc-attr-macros t
        lsp-rust-analyzer-proc-macro-enable t
        lsp-rust-analyzer-use-rustc-wrapper-for-build-scripts t
        lsp-rust-analyzer-import-enforce-granularity t))
#+end_src
* Composition
Modes for handling plain text and prose
** Markdown
Everybody's favorite markup format
*** Markdown mode
Make the following configuration tweaks to result in a better markdown experience:
 - Use a variable pitch font (this is prose after all)
 - Turn on header scaling
 - Default to gfm mode for readmes
 - Turn on auto-fill mode
 - Hide mark up
 - Fontify code blocks with the language's native mode

The goal here is to create a more pretty and fluid composition environment for prose, closer to what you would get in a word processor, but without the horrors of wysiwyg.

#+begin_src emacs-lisp
(use-package! markdown-mode
  :mode ("README\\.md" . gfm-mode)
  :hook (markdown-mode . variable-pitch-mode)
        (markdown-mode . auto-fill-mode)
  :config
  (setq markdown-header-scaling t
        markdown-hide-markup t
        markdown-fontify-code-blocks-natively t))
#+end_src
*** Grip mode
Provide a live, rendered preview when editing markdown readmes using [[https://github.com/joeyespo/grip][grip]].
#+begin_src emacs-lisp
(use-package! grip-mode
  :bind (:map markdown-mode-command-map
         ("g" . grip-mode)))
#+end_src
* Applications
Emacs is good for more than just editing text
** RSS
Use ~elfeed~ for RSS. Doom provides most of the configuration, but we'll make a few minor tweaks:
 - Automatically update the feed when opening elfeed
 - Set default filter to only show unread posts
 - Put the elfeed directory in the org dir (I have it in syncthing)
 - Create a global keybinding for elfeed (~C-x w~)

#+begin_src emacs-lisp
(use-package! elfeed
  :hook (elfeed-search-mode . elfeed-update)
  :hook (elfeed-show-mode . variable-pitch-mode)
  :hook (elfeed-show-mode . visual-line-mode)
  :bind ("C-x w" . elfeed)
  :config
  (setq elfeed-search-filter "@4-weeks-ago +unread"
        elfeed-db-directory (concat org-directory "elfeed/db/")
        elfeed-enclosure-default-dir (concat org-directory "elfeed/enclosures/")
        shr-max-width nil)
  (make-directory elfeed-db-directory t))
#+end_src
** Email
Use ~mu4e~ for email. Most of the bootstrap is provided by doom emacs.
First, tell mu4e to use msmtp
#+begin_src emacs-lisp
(after! mu4e
  (setq sendmail-program (executable-find "msmtp")
        send-mail-function #'smtpmail-send-it
        message-sendmail-f-is-evil t
        message-sendmail-extra-arguments '("--read-envelope-from")
        message-send-mail-function #'message-send-mail-with-sendmail))
#+end_src
Tell it where our account's stuff is
#+begin_src emacs-lisp
(after! mu4e
  (set-email-account! "mccarty.io"
                      '((mu4e-sent-folder . "/nathan@mccarty.io/Sent")
                        (mu4e-drafts-folder . "/nathan@mccarty.io/Drafts")
                        (mu4e-trash-folder . "/nathan@mccarty.io/Trash")
                        (mu4e-refile-folder . "/nathan@mccarty.io/Archive")
                        (smtpmail-smtp-user . "nathan@mccarty.io"))
                      t)
  (add-to-list 'mu4e-bookmarks
               '(:name "Inbox - nathan@mccarty.io"
                 :key ?m
                 :query "maildir:\"/nathan@mccarty.io/Inbox\" AND NOT flag:trashed")))
#+end_src
Tell it to enable the modeline display
#+begin_src emacs-lisp
(after! mu4e
  (mu4e-alert-enable-mode-line-display))
#+end_src
Tell it not to update the mail itself, we have a systemd unit for that
#+begin_src emacs-lisp
(setq +mu4e-backend nil)
(after! mu4e
        mu4e-get-mail-command "true")
#+end_src